• φ40X300吊线灯.jpg
  • φ40X300吊线灯-2(1700635586105).png

Pendant Light Fix




Name: Pendant Light Fix
Watt: 6w
CRI: Ra>90
Lumen: 568Lm
Voltage: 40-48V
Size: Φ40*300mm
CCt: 3000k/4000k/2700-6000k
System Options: No Dim/Bluetooth/Zigbee


Pendant light fixture is a type of lighting fixture that hangs from the ceiling using a chain, cord, or rod. It is commonly used to provide focused lighting in specific areas such as dining tables, kitchen islands, or entryways.

To fix a pendant light, you may follow these steps:

1. Turn off the power: Before working on any electrical fixture, always turn off the power at the circuit breaker to ensure your safety.

2. Remove the existing fixture: Unscrew the screws or nuts holding the fixture in place and carefully detach it from the electrical box. Disconnect the wires by removing wire nuts or unscrewing terminal screws.

3. Check the wiring: Inspect the wiring for any damages, loose connections, or signs of wear. If necessary, replace any damaged wires and ensure all connections are secure.

4. Install the new fixture: Follow the manufacturer's instructions to install the new pendant light fixture. Connect the wires by matching the colors (usually black to black, white to white, and green or bare copper to the ground).

5. Secure the fixture: Attach the new fixture to the electrical box using the provided screws or nuts. Make sure it is securely fastened and level.

6. Restore the power: Turn the power back on at the circuit breaker and test the pendant light to ensure it is working properly.

Remember, if you are unsure about any step or encounter any difficulties, it is always recommended to seek professional help from a licensed electrician.

Related Products





Contact Information

Phone: 18925344561 / 18925344891
E-mail: /
Address: No. 158 Le'an Road, Lianfeng village, Xiaolan, Zhongshan, Guangdong, China


CopyRight © 2022 Zhongshan Tuer Precision Manufacturing Co., Ltd. Rights Reserved